![](../images/logo-K-TOP_150x29.jpg)
Dismantling Joint
- For joining two metallic pipes / fittings with both flanged ends
- Flanged connection to BS EN 1092-2
- Ductile iron body with epoxy coating
- EPDM gasket
- PN16
- DN 80-600mm
![](../images/K-TOP_DN_300_Assembly_v2.jpg)
Flange Adapter
- For water meter connection
- For joining two metallic pipes / fittings with one end spigot and one end flange
- Flanged connection to BS EN 1092-2
- Ductile iron body with epoxy coating
- EPDM gasket
- WSD General Acceptance (GA) approved
- PN16
- DN 80-600mm
![](../images/K-TOP_DN_150_Assembly.jpg)
Slip On Coupling
- For joining two metallic pipes / fittings with both plain (spigot) end, such as drainage epoxy cast iron pipe (EN 877) and ductile iron pipe (EN 598)
- Flanged connection to BS EN 1092-2
- Ductile iron body with epoxy coating
- EPDM gasket
- PN16
- DN 80-600mm
- For certain sizes where the OD size range is too large, please contact KHK for further solutions
![](../images/K-TOP_DN_300_Assembly_.jpg)
![](../images/technoflex_icon.png)
Rubber Flexible Joint
- Sound and vibration absorption
- EPDM rubber
- Suitable for potable, chilled, flushing water
- PN16 BS EN 1092-1 carbon steel flanges
- DN32-600
- Control / tie rods available upon request
![](../images/technoflex_Rubber_Flexible_Joint.png)
Stainless Steel Flexible Joint
- For compensating pipe misalignment
- Suitable for potable water
- Absorb thermal expansion of pipe
- Absorb vibration
- DN25-300
- Carbon steel (BS EN 1092-1) loose flanges with SS304 hoses in 300mm length
- Pressure tested to BS EN 12266-1
- PN16 and PN25
![](../images/technoflex_Stainless_Steel_Flexible_Joint.jpg)
Stainless Steel Expansion Joint
- To absorb axial movements (elongation and compression) on piping systems caused by thermal changes
- Suitable for potable, chilled or seawater
- DN20-300
- SS304 and SS316 stainless steel (BS EN 1092-1) flanges and bellow options
- Pressure tested to BS EN 12266-1
- PN16
![](../images/technoflex_Stainless_Steel_Expansion_Joint.jpg)