Hook-up
 
The Hook-Up Flow Management Systems are pre-fabricated units combining the essential control components and connecting pipework associated with terminals units, into one compact, fully-assembled and tested unit ready for simple and fast on-site connection.
 
Hook-Up Elite Prime with PICV & Drain
  • Compact, pre-fabricated unit – now available with Elite Prime PICV (Fig 1934) with a wide range of settable flows to suit all applications
  • All valves are subject to both a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. This provides reassurance of performance and accuracy within each valve
  • Provides accurate flow rates & differential pressure control as well as flow measurement (Fig. EP701PF), system flushing and isolation
  • Fully assembled & factory tested unit reduces installation time, costs and specification risks
  • DZR H Body tested to 3.1X Design Working Pressure (DWP) during development for design robustness and tested to EN12516-2 to comply with the Pressure Equipment Directive (PED)
  • Available with and without extension stems to suit customer specification
  • On-Off, modulating or feedback actuators are available separately to match specification
  • Available in 400kPa & 800kPa
  • Size: 15/15 to 20/20
  • Centre size: 80mm
  • Pressure rating: PN16
  • End connections: Flushing bypass body - BSP Parallel, Strainers & Tailpieces - BSP Taper
 
 
 
 
Hook-Up Elite Prime with PICV & Strainer Drain
  • Compact, pre-fabricated unit – now available with Elite Prime PICV (Fig 1934) with a wide range of settable flows to suit all applications
  • All valves are subject to both a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. This provides reassurance of performance and accuracy within each valve
  • Provides accurate flow rates & differential pressure control as well as flow measurement (EP801PF), system flushing and isolation
  • DZR H Body tested to 3.1X Design Working Pressure (DWP) during development for design robustness and tested to EN12516-2 to comply with the Pressure Equipment Directive (PED)
  • Fully assembled & factory tested unit reduces installation time, costs and specification risks
  • Can be tailored to suit customer specification
  • On-Off, modulating or feedback actuators are available separately to match specification
  • Size: 15/15 to 20/20
  • Centre size: 80mm
  • Pressure rating: PN16
  • End connections: Flushing bypass body - BSP Parallel, Strainers & Tailpieces - BSP Taper